Frequently Asked Questions

Dolby Audio in the soundbar adds a sense of height and depth to your audio experience. This makes it feel as if the sound is coming from all around you, not just from the front or sides. By combining forward-firing speakers, subwoofer, and rear satellite speakers, Aavante Prime 5.1 7050D creates an immersive effect so you can hear crisp dialogue, dynamic effects, and rich bass from around you.

You can play supported content from OTT platforms (specifically displaying the Dolby Audio logo) that offer selected movies and series mixed in Dolby Audio, allowing you to enjoy immersive, multidimensional sound with the soundbar. To experience Dolby Audio properly, ensure that your TV and connected devices (like TV streaming sticks or set-top boxes) have Dolby Audio enabled in their audio or channel settings. You can also adjust additional audio settings on your TV to optimize sound quality.

Please note that YouTube and music streaming apps do not currently support Dolby Audio, so playback from these platforms will be in standard stereo or surround sound rather than Dolby Audio.

To experience Dolby Audio with Aavante Prime 5.1 7050D, make sure that you have the following requirements in place:

1. Compatible TV or Playback Device:

The TV, streaming stick, set-top box, or gaming console must support Dolby Audio output via HDMI (e-ARC). HDMI (e-ARC) [Enhanced Audio Return Channel] allows your TV to send audio to the soundbar through a single HDMI cable without compression, thereby simplifying setup and supporting high-quality sound formats.

2. High-speed HDMI Cable:

Use an HDMI 2.1 cable to connect the soundbar to your TV, as regular HDMI cables may not transmit the complete Dolby Audio signal.

3. Correct Audio Settings:

If Dolby Audio is not auto-activated in the audio eARC settings, please set the sound output mode to HDMI eARC/ARC or external Dolby Audio or Auto mode or External Sound System . In addition, digital audio output mode should be set as automatic or decoded output as Dolby Audio or Pass through in your TV’s audio settings. Please make sure that the digital audio output mode is not set to PCM .

4. Soundbar Settings:

Also, ensure the soundbar connectivity mode is set to HDMI by pressing the Input button on the soundbar control panel or on the remote.

Note: Dolby Audio will automatically activate when the compatible content is played. There is no need for manual activation once the soundbar is connected properly. If Dolby Audio does not auto-activate, please recheck the HDMI cable type, connection port, and your TV audio settings.

Plug in the power cord on the soundbar to the wall outlet. Short press the Power button on the soundbar control panel or on the remote control to switch on the soundbar. Then, press the Input button on the soundbar or remote control to switch to Bluetooth mode.Connect the wireless subwoofer to the power outlet.Connect the rear satellites/ speakers to power. The Soundbar, Subwoofer and Satellites should get auto paired.

Please refer to the user manual for detailed instructions.

 

1. After powering on the soundbar, press the Input button again on the remote control or the soundbar to select HDMI (e-ARC) mode.2. Using a high-speed HDMI (e-ARC) cable, connect the HDMI (e-ARC) connector on the soundbar to the HDMI (e-ARC) connector on your TV. The HDMI (e-ARC) connector on the TV might be labeled differently, so please refer to the TV user manual.3. If you need to connect a set-top box, first connect the HDMI (e-ARC) connector and pair it to the soundbar. Then connect the set-top box.4. When HDMI (e-ARC) is connected, the TV sound setting in "sound output" mode should be set as . In addition, digital audio output mode should be set as . When the HDMI (e-ARC) cable is connected, the TV digital audio output is set as Dolby Audio or Auto mode. Then start playing music on the TV.5. You can also change the audio settings by using the relevant buttons on the remote control.6. Use the volume buttons to adjust the volume to your preference.

If the rear satellite speakers are not connected to the Soundbar automatically, power on the satellite speakers. The blue LED indicator on the rear satellite speaker will blink slowly to indicate that the satellite speaker is in Pairing mode. Press and hold the PAIR button on the bottom of the satellite speaker for 3 seconds. The LED will start blinking quickly indicating that it is ready to be automatically paired with the Soundbar. After 20-30 seconds, the blue LED will be solid on to indicate the successful pairing between the rear satellite speakers and the soundbar.

 

Soundbar Position : Place the soundbar centrally below or above your TV, facing directly toward the listening area. Avoid blocking the TV’s sensors or placing it behind objects. Ensure that the forward-firing speakers are unobstructed by any objects or furniture. For best results, ensure there’s a flat, reflective ceiling approximately 8–12 feet high and that the soundbar is not placed inside a cabinet or under a shelf. Subwoofer Placement : Position the subwoofer near the front of the room, close to a wall or corner, and keep it unobstructed for consistent bass output. Wireless Rear Satellite Speakers : Place the rear satellite speakers slightly behind the main listening position and at ear height. Ideally, position them 2–3 meters to the left and right of the seating area for balanced surround effects. Please do not roof-mount the rear satellite speakers, as this can affect sound direction and imaging. Maintain an equal distance from the center listening position for uniform sound distribution.After placement, fine-tune the rear satellite volume and bass levels to match your room’s acoustics for optimum listening comfort.

 

The soundbar delivers Dolby Audio-supported content in an immersive manner wherein the rear satellites primarily reproduce ambient sounds, background effects, and directional cues, while dialogues remain focused through the main forward-firing speakers. Additionally, the subwoofer handle low-frequency effects, enhancing the overall cinematic experience.When connected via HDMI (e-ARC), the audio output from the soundbar, subwoofer, and rear satellite speakers depends on whether the source content is Dolby-supported or not.Dolby-supported content activates surround audio with dynamic effects automatically, while non-Dolby content plays in a stereo-like configuration with dynamic Dolby effects disabled.

Yes, Aavante Prime 5.1 7050D supports wireless Bluetooth connectivity for streaming music directly from your phone, tablet, or computer. After powering on, press the Input button on the soundbar or remote control to enable Bluetooth mode.

When connected via Bluetooth, the soundbar will operate in Stereo mode, regardless of the content type or your media device. So, whether you are playing music, movies, or any other media, the audio transmitted over Bluetooth will remain two-channel stereo.

When music is streamed via Bluetooth, the rear satellite speakers will play the standard stereo or multi-channel audio derived from the source with vocals. Please note that Dolby Audio or Dolby Audio effects cannot be transmitted over Bluetooth, as these formats require HDMI (e-ARC) connections or optical inputs. So, immersive 3D sound can be experienced only when playing Dolby Audio-enabled content through supported wired or OTT connections, and not via Bluetooth.

For an optimal surround sound experience in a standard room setup, we recommend the following settings as a starting point:

Bass (Subwoofer): Level 3Rear Satellite Speaker Volume: Level 5 Note: The above values are suggested reference points and may vary based on your room’s acoustics, furniture placement, and personal listening preferences. You can fine-tune the bass and rear satellite levels to achieve the sound balance that best suits your environment.

Please make sure that the soundbar is powered on, the correct input source is selected, and the TV’s audio output is set to the right connection.