Aavante Prime 5.2.4 6250DA
Aavante Prime 5.2.4 6250DA
Aavante Prime 5.2.4 6250DA
AVAIL FREE IN-HOME INSTALLATION BOOK VIDEO-ASSISTED INSTALLATION

Select your TV Brand Settings

Samsung

Open Menu → Sound → Speaker Settings.

Set the TV sound output to Receiver (HDMI).

Xiaomi

  • Connect HDMI cable to TV HDMI (ARC) and Soundbar HDMI OUT (ARC/eARC).
  • TV Settings: Display & Sound → Audio output → Speakers → Select Audio system.
  • Enable CEC: Additional settings → Inputs → Enable all Consumer Electronic Control (CEC) functions.
  • Set Soundbar input to HDMI ARC mode.

LG

Go to: [Settings] → [General] → [External Devices] → [HDMI Settings].

Ensure connected device supports HDMI Deep Colour if required for picture clarity. Use a certified cable with HDMI logo.

TCL

  • Press Source button on remote.
  • Select TV or other input source.
  • Press OK to confirm.

Sony

  • Connect external device to TV HDMI.
  • Connect TV to Audio System via HDMI cable.
  • Use TV port marked “ARC” or “eARC/ARC”.
Aavante Prime 5.2.4 6250DA

Frequently Asked Questions

How does Dolby Atmos work in Aavante Prime 5.2.4 6250DA?

Dolby Atmos in the soundbar adds a sense of height and depth to your audio experience. With the integrated upward-firing speakers that bounce sound off the ceiling for projecting it vertically, the soundbar creates a realistic overhead audio effect. This makes it feel as if the sound is coming from all around you, not just from the front or sides. By combining forward-firing speakers, dual subwoofers, and upward-firing speakers, Aavante Prime 5.2.4 6250DA creates an immersive, 3D effect so you can hear crisp dialogue, dynamic effects, and rich bass from every direction as intended.

What types of content are best experienced in Dolby Atmos using this soundbar?

You can play supported content from OTT platforms (specifically displaying the Dolby Atmos logo) that offer selected movies and series mixed in Dolby Atmos, allowing you to enjoy immersive, multidimensional sound with the soundbar. To experience Dolby Atmos properly, ensure that your TV and connected devices (like TV streaming sticks or set-top boxes) have Dolby Atmos enabled in their audio or channel settings. You can also adjust additional audio settings on your TV to optimize sound quality.

Please note that YouTube and music streaming apps do not currently support Dolby Atmos audio, so playback from these platforms will be in standard stereo or surround sound rather than Dolby Atmos.

What are the basic device requirements to enjoy Dolby Atmos using Aavante Prime 5.2.4 6250DA?

To experience Dolby Atmos on the Aavante Prime 5.2.4 6250DA, ensure the following:

1. Compatible TV/Playback Device:

Your TV, streaming device, set-top box, or console must support Dolby Atmos output via HDMI eARC. eARC sends high-quality, uncompressed audio to the soundbar through a single HDMI cable.

2. High-Speed HDMI Cable:

Use an HDMI 2.1 cable. Older HDMI cables may not carry the full Dolby Atmos signal.

3. Correct TV Audio Settings:

If Dolby Atmos doesn’t activate automatically, set your TV audio to:

  • Sound Output: HDMI eARC/ARC, External Sound System, or Auto
  • Digital Audio Output: Automatic / Pass Through / Dolby Atmos
  • Important: Do not set Digital Output to PCM
4. Soundbar Input Mode:

Set the soundbar to HDMI mode using the Mode button on the panel or remote.

Once everything is connected correctly, Dolby Atmos will auto-activate when Atmos-supported content is played.If it doesn’t, recheck the HDMI cable type, eARC port, and TV audio settings.

What to expect when playing Dolby and non-Dolby content over HDMI on my Dolby Atmos soundbar?

The soundbar delivers Dolby Atmos-supported content in an immersive manner wherein the rear satellites primarily reproduce ambient sounds, background effects, and directional cues, while dialogues remain focused through the main forward-firing speakers. Additionally, the dual subwoofers handle low-frequency effects, enhancing the overall cinematic experience.

When connected via HDMI (e-ARC)/(ARC), the audio output from the soundbar, subwoofer, and rear satellite speakers depends on whether the source content is Dolby-supported or not.

Dolby-supported content activates surround audio with dynamic effects automatically, while non-Dolby content plays in a stereo-like configuration with dynamic Dolby effects disabled. When playing non-Dolby content, you can opt to enable 3D EQ mode using the remote control. If the 3D EQ mode is not enabled, the rear satellite speakers will also deliver dialogue in the content.

Can I use my soundbar with Bluetooth?

Yes, Aavante Prime 5.2.4 6250DA supports wireless Bluetooth v5.3 connectivity for streaming music directly from your phone, tablet, or computer. After powering on, press the Mode (M) button on the soundbar or remote control to enable Bluetooth mode.

How does the soundbar operate in Bluetooth mode?

When connected via Bluetooth, the soundbar will operate in Stereo mode, regardless of the content type or your media device. So, whether you are playing music, movies, or any other media, the audio transmitted over Bluetooth will remain two-channel stereo.

What is the audio output from the rear satellite speakers when streaming music over Bluetooth?

When music is streamed via Bluetooth, the rear satellite speakers will play the standard stereo or multi-channel audio derived from the source with vocals. Please note that Dolby Atmos or Dolby Audio effects cannot be transmitted over Bluetooth, as these formats require HDMI (e-ARC)/(ARC) connections or optical inputs. So, immersive 3D sound can be experienced only when playing Dolby Atmos-enabled content through supported wired or OTT connections, and not via Bluetooth.